How To Set Up Sodastream

Download Article

Download Article

Many people savor a fizzy, carbonated drinkable with their meal. If you like soda but y'all were tired of buying cans and bottles all the time, you may have purchased a SodaStream car. These machines can seem complicated, but as long equally yous insert the carbonator correctly and choose your level of buzz, you can be drinking delicious soda that you fabricated at dwelling house in no fourth dimension.

Things You Should Know

• Unscrew the cap from the carbonator and insert it into the motorcar. Then, screw the top of the canister into the machine.
• Fill the carbonating canteen with water. Push the carbonating block or button in short bursts to carbonate the water and remove the canteen.
• Pour a capful of SodaMix into the bottle. Screw the cap on and milk shake gently for 10 seconds. Enjoy your soda right away.

1. one

   Fix the soda machine on a sturdy surface, like a countertop or table. Usually, this is a table or kitchen countertop. Make sure that the surface is flat and non tilted so that your soda machine sits upright.^[i]

   • It will besides be helpful to set up your soda machine near a sink and so that yous can fill up your bottle with h2o later.

2. 2

   Remove the plastic seal and unscrew the cap from the carbonator. Your soda machine comes with a carbonator. This is a metallic canister that says "SodaStream CO2" on it. Remove the plastic seal from the top of the canister and throw information technology away. Then, unscrew the plastic cap.^[2]

   • Always read the manual for your specific soda machine before you get-go setting it upwards.

   Advertisement

3. 3

   Take off the dorsum encompass from your soda auto. The back embrace of your soda machine will pop off hands. Pull it from the hole that is on the dorsum of your machine while yous concord the rest of the automobile steady with your other paw. Place the cover to the side.^[iii]

   • If you are using the SodaStream Genesis or another smaller model of the SodaStream, you will pull the top of the soda auto off instead of the dorsum cover.

4. iv

   Insert the carbonator into the soda machine. Identify the carbonator canister into the agree where the embrace was on your soda automobile. Depending on the model of your SodaStream, this volition either be the very back of your machine or the elevation.^[four]

5. 5

   Screw the top of the canister into the tiptop of your soda machine. Plough the carbonator about 3 times in a clockwise position until information technology is screwed in all the style. Make sure information technology is held in place tightly and doesn't wiggle around.^[5]

   • If you have a smaller model of the SodaStream, y'all volition not need to screw your canister in.

6. 6

   Supercede the back cover on your soda auto. Put the cover back onto your SodaStream to lock the carbonator in identify. Brand sure the encompass is on securely before you get-go using your automobile.^[6]

   • No matter what model of SodaStream you have, make sure your cover clicks into place when you put it back on.
   • Your SodaStream may have a CO2 meter that volition warn yous when your carbonator is running low. If information technology does, reset the meter each time you put in a new canister past belongings down the "reset" push button for v seconds.

Advertising

1. i

   Fill up the carbonating bottle with cold water to the fill line. Your soda machine comes with a clear plastic bottle. Fill up your bottle with cold water, either from the tap or from a filter, to the fill line.^[7]

   • Using cold water allows yous to beverage your soda correct away without having to chill information technology get-go.

2. 2

   Snap or spiral the bottle into the auto. Depending on which model of SodaStream that you have, y'all will either snap the bottle into the bottle lock or spiral it into the bottle lock. To spiral it in, plough information technology three times in a clockwise position. To snap it in, simply button the peak of the bottle in place.^[8]

3. 3

   Push the bottle into a vertical position. In one case it is locked in, gently push the bottle into a vertical position so that it is upright.^[9]

   • At that place volition be a gap betwixt the base of operations of the auto and the bottom of the bottle.

4. four

   Press down the carbonating cake or push in short bursts. Depending on your model of SodaStream, either press down on the entire top block of your machine or printing a minor black push to start the carbonation process. Press down in short bursts, taking a 1 second suspension in between each press.^[10]

5. five

   Watch the LED lights that indicate how carbonated your water is. Your soda machine has three levels of carbonation. The first one is light fizz, the second is medium fizz, and the third is strong fizz. As you add carbonation, the LED lights will light up to indicate the levels. Decide how carbonated y'all want the water to be and finish pressing the button once it reaches that level.^[11]

   • Yous may take to try multiple levels of carbonation before you find the 1 that you similar the about.

6. half dozen

   Pull the bottle of water out of the lock mechanism. One time you've added carbonation to your water, you can pull the bottle out of your machine'southward lock mechanism. Depending on your model of SodaStream, either twist the canteen or pull it out toward y'all to unlock information technology.^[12]

Advertisement

1. ane

   Hold your bottle at a 15 degree angle and cascade a capful of SodaMix in information technology. Choose which season of soda yous'd like to put in your carbonated water. You can buy different kinds of SodaMix online or anywhere that yous purchase SodaStream products to replicate many dissimilar flavors of soda.^[thirteen]

   • Holding the bottle at an bending makes it less probable to overflow as you pour.
   • Pop flavors of SodaMix include peach tea, cola, and lemon lime.

2. two

   Screw the cap on your bottle and shake it gently for 10 seconds. Brand certain your SodaMix is mixed thoroughly past putting a cap on the bottle and shaking it gently from side to side. Don't milkshake your canteen also vigorously, or y'all could cause it to overflow.^[14]

   • Yous tin can also slowly turn your bottle upside down and right side upwards to mix in your flavour.

3. 3

   Enjoy your soda correct afterwards information technology is mixed up. Y'all can pour your soda over water ice, or merely drink it from the bottle. Your soda will be common cold since you lot used cold water.^[15]

   • Store your excess soda in the refrigerator with the cap on for up to 2 days.

Advertisement

Add New Question

• Question

  How far into the water does the Jet that carbonates the h2o bottle need to become?

  

  This answer was written past one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  If you fill your bottle to the "Make full Line" that is labeled on the side, the jet will exist able to reach the h2o.

• Question

  Does the canteen have to exist screwed on tightly to the SodaStream auto?

  

  This answer was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Reply

  Yes, your bottle should be screwed on tightly so that it doesn't wiggle around. Otherwise, your bottle could fall off.

• Question

  How practise I remove an empty canister from my SodaStream?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Popular off the embrace from your SodaStream and unscrew the carbonation canister in a counter-clockwise motion. This will permit you to replace your empty canister with a new ane.

• Question

  How do I get it really fizzy? My soda is non very carbonated.

  

  Printing the carbonation push button more times! My SodaStream came with a footling sticker on top advising that the best carbonation was three buzzes (the buzzes come a lilliputian while after you button the button) but...you tin can press every bit many times you want.

• Question

  What if the bottle that came with information technology doesn't spiral in?

  

  My SodaStream has a snap lock system. Simply push the bottle in - no screwing is needed.

• Question

  How do I make it sweeter?

  

  Add together more flavoring, sugar, honey, or any other sweetener you lot like.

• Question

  How long does it take to carbonate a liter of common cold h2o?

  

  For a sodastream bottle that is ane liter, it's around 10 seconds of holding down the push button on a new CO2 cylinder. It takes longer as the CO2 cylinder gets older.

• Question

  Can I put ice in the bottle?

  

  Subsequently information technology's been carbonated, sure. But you'll want 100% liquid h2o in there for the carbonation procedure. A picayune chip of ice inside wouldn't hurt, simply information technology's a adept general rule to avoid it.

• Question

  Is information technology possible that my seal is broken if I'm not getting carbonation with a new bottle?

  

  Aye, this can happen. If your getting a picayune, then it may be not total. Contact client service to get a replacement.

• Question

  Tin I add the season before carbonating?

  

  You can, but it may make a terrible mess as the drink you are mixing will over-fizz due to the contents of the syrup mix.

Bear witness more than answers

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advert

Thank you for submitting a tip for review!

• Never carbonate your water with syrup in the bottle. This will cause information technology to overflow and create a sticky mess.

Advertizing

Things You'll Need

• SodaStream machine (whatever model)
• CO2 canister

• SodaStream bottle

• SodaMix (any flavor)

About This Article

Commodity Summary X

To make soda in a SodaStream machine, yous need to carbonate the water and then add together flavoring. Start by removing the plastic cap from the carbonator that comes with your automobile. Then, insert the carbonator into the back of your soda motorcar and screw the top of the canister into the top. Take the clear plastic carbonating bottle and fill up it with common cold water to the fill line. Attach the bottle to the lock on the forepart of the machine so gently button the bottle into position so it's upright. Press the carbonating button in short bursts to add carbonation to the canteen. Remove the bottle and pour a capful of SodaMix into it to flavour it. Spiral the cap on the bottle and gently shake it for 10 seconds to fully combine it. For tips well-nigh how to watch the LED lights to indicate how carbonated the water is, continue reading!

Did this summary help yous?

Thank you to all authors for creating a page that has been read 287,700 times.

Did this article aid you?

Source: https://www.wikihow.com/Make-Soda-in-a-SodaStream-Machine

Share this post